Car Port Solar Structure
Steel solar carport canopies that turn parking areas into clean-energy generators — sheltering vehicles below while producing power above, with EV-charging-ready spans and decades of galvanised durability.
Park in the shade, power from the sun
What is a Car Port Solar Structure?
A car port solar structure is an engineered steel canopy that mounts PV modules over a parking area, so the same footprint shelters vehicles and generates clean power. ENSOL fabricates these carports in hot-dip galvanised steel for commercial, residential, industrial and public parking.
Why it is used
Parking areas are large, unused horizontal surfaces. A solar carport turns that idle space into a generating asset while shading vehicles from sun and rain — and provides the perfect structure to host EV charging right where cars park.
EV charging ready
Carport bays are designed to integrate EV chargers and cable routing, so the power generated overhead can feed vehicles parked below — a clean loop from panel to plug.
Steel canopy design
Clear-span steel canopies keep parking bays open and column-free where it matters, with tilt and orientation tuned for generation and rainwater run-off.
High durability
Heavy structural steel, hot-dip galvanised to IS 4759, withstands wind, weather and decades of outdoor exposure with minimal maintenance.
Why ENSOL
Four decades of structural steel fabrication, in-house galvanising and IS 800 / IS 875 engineering under one ISO 9001 system — with carport spans and finishes designed to your site.
Engineered advantages
Steel Canopy Design
Clear-span galvanised canopies keep parking bays open and column-free.
EV Charging Ready
Bays designed to integrate EV chargers and cable routing.
Rain & Sun Protection
Sheltered parking that shields vehicles from rain and heat.
High Wind Resistance
Engineered and checked for site wind loads per IS 875.
Hot Dip Galvanized Steel
Post-fabrication galvanising to IS 4759 for lasting protection.
High Load Bearing
Heavy steel sized for panel, wind and snow / dust loads.
Custom Spans & Layouts
Single-row, double-row and cantilever layouts to your site.
Long Service Life
Galvanised steel delivers decades of low-maintenance service.
Specification sheet
| Material | Structural steel — MS / GI / hot-dip galvanised sections |
|---|---|
| Steel Grade | IS 2062 E250 / E350 (project-specific) |
| Coating | Hot-dip galvanised; GSM matched to environment |
| Canopy Type | Single-row, double-row & cantilever spans |
| Clearance Height | 2.4–3.0 m+ vehicle clearance (custom) |
| Tilt Angle | 5° / 10° / 15° for generation & run-off |
| Wind Resistance | Site-specific per IS 875 (Part 3) |
| Design Standard | IS 800, IS 875, IS 4759 |
| EV Provision | Charger mounting & cable routing ready |
| Fasteners | HDG / SS bolts, 4.6–8.8 grade |
| Service Life | 25+ years (coating & environment dependent) |
| Warranty | Up to 25 years on hot-dip galvanised builds |
Specifications are indicative and customised per project requirement and site conditions.
Where it's used
Commercial Parking
Office and retail parking turned into generation.
Residential Parking
Homes and societies sheltering cars with solar.
Industrial Parking
Factory and warehouse fleet parking canopies.
Airport Parking
Large airport lots with high-yield canopies.
Shopping Mall Parking
High-traffic retail decks with EV charging.
EV Charging Hubs
Dedicated charging plazas powered overhead.
Institutional Campuses
Universities and hospitals with large lots.
Government Projects
Public parking and smart-city installations.
A manufacturer you can build on
In-house Manufacturing
Fabrication and galvanising under one controlled ISO 9001 system in Raipur.
ISI Grade Steel
Quality structural steel to IS standards, with full material traceability.
Precision Engineering
Code-compliant designs sized member-by-member to load and site.
Hot Dip Galvanization
Post-fabrication galvanising to IS 4759 for genuine, lasting protection.
Custom Canopy Design
Spans, tilt and layouts engineered to your parking footprint.
Fast Delivery
Integrated facility and planning keep lead times short.
Experienced Team
Four decades of structural steel fabrication behind every project.
Installation Support
On-site guidance for safe assembly and erection.
Drawing to dispatch, under one roof
- 01
Design
Carport layout developed to your parking footprint and bays.
- 02
Structural Analysis
Load, wind and structural validation before anything is cut.
- 03
Material Selection
IS-grade steel verified against mill test certificates.
- 04
CNC Cutting
CNC / plasma cutting and precise hole punching.
- 05
Fabrication
Assembly of canopy frame members to drawing.
- 06
Welding
Certified welding of joints with NDT.
- 07
Hot Dip Galvanization
Hot-dip galvanising per IS 4759 for corrosion life.
- 08
Quality Inspection
Dimensional and coating-thickness checks with traceability.
- 09
Dispatch
Marked, bundled and documented for site assembly.
- 10
Installation Support
On-site guidance for erection over the parking area.
Why it pays off
Dual Use of Parking
Shelter vehicles and generate clean power on one footprint.
EV Charging Integration
Charge cars with the power produced overhead.
Rain Protection
Keeps vehicles dry and shaded in all weather.
High Wind Resistance
Designed and checked for site wind loads per IS 875.
Hot Dip Galvanized
True corrosion protection for outdoor parking sites.
Low Maintenance
Galvanised steel needs minimal upkeep across its life.
Long Service Life
25+ years of dependable performance by design.
High Durability
Heavy steel built to withstand decades outdoors.
Solar carports in the field
Solar carports, answered
Common questions from facility owners, developers, EPCs and government departments.
It is an engineered steel canopy that mounts solar panels over a parking area, so the same footprint shelters vehicles and generates clean power. ENSOL fabricates these in hot-dip galvanised steel for all parking types.
Yes. Bays are designed to integrate EV chargers and cable routing, so the power generated overhead can charge the vehicles parked below.
Yes. The steel canopy shades vehicles from heat and shelters them from rain, while the tilt is set to shed rainwater and maximise generation.
Commercial, residential, industrial, airport, shopping-mall, institutional and government parking — from a few bays to large lots.
Every design includes site-specific wind-load analysis per IS 875 with uplift-resistant detailing for the canopy and columns.
Structural steel to IS 2062 (E250 / E350), designed per IS 800, and hot-dip galvanised to IS 4759 for decades of corrosion-free service.
Yes. Spans, clearance, tilt, column layout (single, double or cantilever) and finish are all engineered to your parking footprint.
Yes. Structures ship marked and documented, and ENSOL provides on-site guidance for safe assembly and erection over the parking area.
Power Your Parking with ENSOL Solar Carports
Share your parking layout and load needs — our engineering team responds with a tailored carport design, drawings and pricing. +91 99772 66990 · business@powerensol.com